5000 Channel: 7 gauge extruded aluminum, unspliced lengths up to 20'. Custom-curved at jobsite. Minimum radius: 2', approx. 1-5/8"w x 3-1/4"h: 1ft: 1-1/2 lbs.
5001 Nylon Ball-Bearing Single Carrier: Carrier spacing: 12". Block constructed of plated steel supported from 2 nylon tired ball-bearing wheels. Plated swivel for free, effortless curtain movement. Rubber bumpers and nylon strips attached to carrier to assure quiet operation, width: 2 1/8", wt: 12 oz.
5002 Master Carrier: Block constructed of plated steel supported from 4 nylon-tired ball-bearing wheels and including rubber bumper. Carrier width: 5-1/4", wt: 3 lbs. 8 oz.
5003 Live End Pulley: Plated steel construction equipped with 2 oil-impregnated sleeve bearing 5" diameter glass-filled nylon ball-bearing wheels. Anchors to track end. Extends beyond track 6", width: 6-1/2", wt: 8 lbs. 10 oz.
5004 Dead End Pulley: Plated steel construction equipped with 1 oil-impregnated sleeve-bearing 5" diameter glass-filled nylon ball-bearing wheel. Attaches to track end, width: 5", wt: 4 lbs. 14 oz.
5007 Lap Clamp: For attaching double-sectioned track at center overlap. Used with suspended tracks only, wt: 2 lbs. 4 oz.
5008 Hanging Clamp: (Sold in pairs.) Recommended spacing: 5' with additional units at curves and in stack areas. Constructed of plated steel. Pipe batten recommended for track suspension. Adjustable to any location, ht: 4", wt: 1 lb. 8 oz.
5009 End Stop: Prevents carriers from moving beyond selected position in track. Located at center overlap and track dead ends, wt: 2 oz.
5058 Cable Guide: Consists of nylon ball-bearing rollers for guiding cable along track channel. Drawing of track layout required when ordering to assure proper roller placement, wt: 1 lb. 10 oz.
